Setup Dns Blackberry Q10 Z10

Setting up VPNUK SMART DNS on Blackberry Z10 and Q10.

1. Registering your IP on the SmartDNS service

Login to the Client CP using your VPNUK login username and password.

2. Go to SmartDNS Menu

Go to the ‘VPNUK Smart DNS‘ sub menu and select ‘IP Address Check-in’.

3. Register IP

The Smart DNS system will reveal your current IP address, click onto the ‘Enable’ button, that will register your current IP address on the Smart DNS service.
IMPORTANT: If you change location, or if your IP address changes you will need to check-in the new IP. For example, if you are using wi-fi, at home, and then go to an outside location and use a wi-fi hotspot, you will need to check-in that new IP address. You will then need to check-in your home IP once you return home. Each IP address you use to access the internet has to be checked in before you can access the SmartDNS service.

4. Confirmation

The Smart DNS system will confirm your IP address has been registered, it takes just a couple of minutes become enabled on the service.

5. Registered

The Smart DNS system will confirm your IP address has been registered, it takes just a couple of minutes become enabled on the service.

6. Get SmartDNS IP

Click onto the ‘Smart DNS Server IP’ link in the menu.

7. Copy IP

Copy or make a note of the ‘Smart DNS Server IPs’ that you are to use, you will need this later in the setup.

8. Settings

Go to your Blackberry ‘Settings’.

9. Network Settings

Go to ‘Wireless and Connections’ settings.

10. Wi-Fi

Go to ‘Wi-Fi’.

11. Modify Network Settings

Click your connection from the list of available networks for a few seconds and select the ‘Edit Settings’ icon when the option appears.

12. Auto Off

Scroll down and toggle the ‘Auto Obtain IP’ to the ‘Off’ position.

13. Settings

1. Enter your IP address
2.
Enter your Subnet Mask as 255.255.255.0
3. Enter our SmartDNS IP’s as your ‘Primary DNS’ and ‘Secondary DNS
4. Enter your gateway IP and then click ‘Save’.